3.5KVA/48V Solar Inverter
DSP based pure sine wave inverter system
Auto Sense Intelligent Control Smart Charger
Mains Mode Short Circuit Protection
Fast Changeover ensuring Compatibility with Computers
TDR (Time Delay Relay), especially for AC compressor based applications
Compatible with Generator Sets
Reliable power Back-up Source for Emergency / Critical Electrical Loads in sudden power outages.
Computers & Peripherals Office Equipment
Petrol / Diesel Dispensing Machines, Air Conditioner
Many More application which require reliable back-up power
Residential Apartments, Shopping Malls, Banks, Corporate Offices, Hospitals, Petrol Pumps, Academic Institutes, Clinical Laboratories, Hotels, etc
3.5kVA – 24V Inverter – Studer Xtender XTM 35000 out of 5(0)
PRAG offers you Studer Xtender XTM 3500 with its seemingly limitless programmable functions, the XTM offers unequaled flexibility compared to other products on the market.
This Studer Xtender XTM 3500 – 3.5KVA – 24V – inverter/charger has a continuous power rating of 3kVA up to an ambient temperature. In addition to this, it has a 30 minute power rating of 3.5kVA, and can deliver 9kVA for up to 5 seconds! Thanks to this very high surge power capacity, it can supply without worries loads with a high start-up current.
The battery charging current can be adjusted between 0 and 90Adc. The factory default settings include a battery charging curve best suited for lead acid batteries with gelled electrolyte (GEL). This battery charging curve can be easily adapted to other types of batteries including OPzS, NiFe, Lithium and Redox Flow, to name but a few.
The transfer system is active when an AC power source (generator, public grid, shore power…) is available at the AC input of the Xtender. The transition between inverter and transfer mode is achieved without any power cut and allows up to 50Aac of current to pass through to the loads. Similarly, the transition between transfer and inverter mode is extremely fast (max 15ms), which makes the Xtender suitable for many UPS (uninterruptable power supply) applications.
The Smart-Boost function allows the Xtender to assist the AC source via the inverter function. This way, the currents from both sources (AC-in and inverter) are combined to deliver the energy required by big loads if the loads are more than the AC source can supply.
The injection function allows the Xtender to send energy to the grid. This function is especially useful in energy storage systems where either the excess energy is injected to the grid, or a specific current is injected at a specific time of the day.
The Xtender has two auxiliary contacts, configured by default for the automatic start of a generator and the alarm function.
Studer Xtender XTM 3500 – 3.5KVA – 24V – Inverter xts-xtm-xth-en_page_09-4
Studer Xtender XTM 3500 – 3.5KVA – 24V – Inverter Design
The RCM-10 accessory offers a remote entry to control the inverter externally.
In addition, the Xtender can be equipped with a remote entry, which can be used to change functions or control the system externally.
Monitoring and control on site or remotely is possible with the RCC-02/03 remote control or with the LAN, GSM or SMS interfaces. Detailed information on all Xtender accessories can be found on the corresponding section of the website.
The Xtender communication bus is shared with the MPPT solar charge controllers of the VarioTrack and VarioString series. Inverters and charge controllers are synchronized to ensure an optimum charge of the battery and use of available energy.
Studer Xtender XTM 3500 – 3.5KVA – 24V – PRAG Inverter Features
True sine wave voltage
Reliable and silent with any kind of load
Outstanding overload capabilities
Smart-Boost function for assistance to the source even with difficult loads
Automatic reduction of peak loads (power shaving)
Multi-stage programmable battery charger with PFC (Power Factor Correction)
Stand-by level adjustable over a large range and from a very low threshold
Ultra-fast transfer relay
Control by digital signal processors (DSP)
Easy to Install, Operate resolve SolveSKU: n/a
2KVA – 24V Talent Inverter0 out of 5(0)
PRAG 2KVA – 24V Talent Inverter (Pure Sine Wave) Inverter/Charger is a combination of an inverter, battery charger and AC auto transfer switch into one complete system with high conversion efficiency.
So, it is packed with unique features and it is one of the most advanced inverter and chargers in the market today.
Furthermore, the PRAG Inverter features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.
Subsequently, the (Pure Sine Wave) Inverter and Charger is equipped with a powerful charger of up to 110Amps (depending on model). However, the overload capacity is super to the best of the continuous output for limited period of seconds to reliably support tools and equipment longer.
Trust the product will deliver the best result for you.
PRAG 2KVA – 24V Talent Inverter Features
Pure Sine Wave Output
Narrow/Wide Input Range Selection
Charging Current Selectable
Built-In AC Charger
Cold Start Function
USB/RS232 Multiple CommunicationsSKU: n/a
1.5KVA 24V Solar Inverter0 out of 5(0)
High reliable system
Advanced digital automatic control technology to ensure the power durable and reliable
Strong Environment Adaptability
Wide input voltage and frequency range to avoid frequent switching.
Intelligent charging mode.
Shutdown charging function.
Three steps charging mode
Full Display Information
LCD Display: Input voltage, Input frequency, Output voltage, Output frequency, Battery voltage, PV input voltage, Solar charger, Full load, Temperature, Failure.
LCD Display Mode
Full Display Function
Inverter short circuit and overload protection function.
Battery over discharge protection.
Solar cell module polarity reverse connection protection.
Solar charge controller, inverter and other internal short circuit protection.
Wide input voltage range
Fully digitized microprocessor control
UPS mode and inverter mode suit for different application
LCD displays comprehensive parameters (Optional)
Short circuit and overload protection
Intelligent battery management
Changing current is optional
Compatible with generatorSKU: n/a