Special Offer
7.5KVA 6KW 48V Pure sine wave combined inverter & charger
₦295,000.00-
Deep Cycle Battery, Luminous Battery
Luminous SMF BLUE 200AH 12V
- Absorbent Glass Mat (AGM) technology for efficient gas recombination
- Not restricted for air transport-complies with IATA/ICAO Special Provision A67
- No effect float or cyclic application under controlled depth of discharge (DoD)
- Can be mounted in any orientation
- Low self-discharge
APPLICATION
- All purpose
- Uninterruptable Power Supply (UPS)
- Electric Power System (EPS)
- Emergency backup power supply
- Emergency light
- Railway signal
- Aircraft signal
SKU: n/a -
Deep Cycle Battery, Genus Battery
Genus battery 200ah 12V Sealed
Genus supplies high performance, zero maintenance batteries ideal for use with UPS and Inverters. These batteries are reliable and economical for all types of inverters that are used for a variety of domestic and office applications. They are especially designed to support long and frequent power cuts.
SKU: n/a -
Deep Cycle Battery, Genus Battery
Genus battery 200ah 12V Sealed
Genus supplies high performance, zero maintenance batteries ideal for use with UPS and Inverters. These batteries are reliable and economical for all types of inverters that are used for a variety of domestic and office applications. They are especially designed to support long and frequent power cuts.
SKU: n/a -
Deep Cycle Battery, Ritar Battery
Ritar battery 200AH 12V
Ritar power, the safe and intelligent power. The VRLA Deep Cycle (DC) battery series is specially designed for frequent cyclic discharge. By using strong grids and specially designed active material, the DC series battery offers 30% more cyclic life than the standby series. It is suitable for UPS, solar and wind energy, telecom system, electric power system, electric vehicles, golf cars and many more.
SKU: n/a
-
Victron
Victron Energy VICTRON ENERGY EASYSOLAR 48/5000 INVERTER
AC distribution
The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A and two 16A circuit breakers.
An additional 16A output is controlled by the AC input: it will switch on only when AC is available.PowerAssist
Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.
Unique solar application software
SKU: n/a -
A&E Inverter, Inverter
5KVA 48V Solar Inverter
(1) Automatic voltage regulation
(2) Protection against brownout & over voltage.
(3) The AC single phase voltage regulator has a wide input voltage range
(4) Short circuit & overload protection
(5) Selectable delay time
(6) LCD/LED/Analog display available for your choose.
SKU: n/a -
CyberPower Inverter, Inverter
3.5kVA – 24V Cyber Power Inverter
3.5kVA – 24V Cyber Power Inverter:- Non-stop power backup with guaranteed quality power output to support a wide range of applications
Ideal for security/emergency system, the Emergency Power Systems Series with Automatic Voltage Regulation (AVR) provides AC power output to guarantee stable power supply. When connected to additional external batteries and generators, the products provide backup power output during power failures by automatically switching from utility to external batteries, ensuring seamless operation of devices.
The systems also feature multifunction LCD readout to display precise information of power and battery conditions for convenient management.
Pure Sine Wave Output
The product provides pure sine wave output, which is suitable for equipment requiring active PFC power supply, motor-based devices and sensitive electronics. It guarantees electronic equipment to run more efficiently.
3.5kVA – 24V Cyber Power Inverter – Application
- Home
- Office
- Back Office
- Server Room
- Supermarket
- Factory
3.5kVA – 24V Cyber Power Inverter – Features
- Outstanding overload capabilities
- High efficiency
- Easy to Install, Operate resolve Solve
- Generator Compatible
- Automatic Switch-over
- Pure Sine Wave Output
- Automatic Voltage Regulation (AVR)
- Auto-charge
- Fast Transfer Time
- LCD Status Display
- LED Status Indicators
- Tower Form Factor
SKU: n/a -
A&E Inverter
A&E 5KVA PRO-Low Frequency Pure Sine Wave Inverter
Features:
LCD display , easy to read how inverter operates on LCD screen
Compatible to generator
5-levels DIP switch , offering customized performance
9-levels battery selector , Enable to charge Li-thium , Gel , lead-acid battery
DC(Solar)/AC prority optional
4 levels charge current adjustable
With RS232 communication port
With BTS & GTS , optimazing battery performance & start generator automatically
Power saver Switch , Enable to minimize standby consumptionMODEL A&E 4KVA PRO A&E 5KVA PRO A&E 7.5KVA PRO Default Battery System Voltage 24VDC 48VDC 48VDC INVERTER OUTPUT Reted Power 3KW 4KW 6KW Surge Rating (20ms) 9.0KVA 12KVA 18KVA Capable Of Starting Electric Motor 2HP 3HP Waveform Pure sine wave/ same as input (bypass mode) Nominal Output Voltage RMS 220V/230V/240VAC(±10% RMS) 220V/230V/240VAC(±10% RMS) Output Frequency 5OHz/60Hz±0.3 Hz Inverter Efficiency(Peak) >88% Line Mode Efficiency >95% Power Factor 1 Typical Transfer Time 10ms(max) 10ms(max) AC INPUT Voltage 230VAC Selectable Voltage Range 96~132VAC 155~280VAC(For Personal Computers) Frequency Range 50Hz/60Hz (Auto sensing) 40~80Hz BATTERY Minimum Start Voltage 10.0VDC /10.5VDC for12VDC mode (*2 for 24VDC, ) Low Battery Alarm 10.5VDC±0.3V for12VDC mode (*2 for 24VDC, ) Low Battery Cutoff 10.0VDC±0.3V for12VDC mode (*2 for 24VDC, ) High Voltage Alarm 16.0VDC±0.3V for12VDC mode (*2 for 24VDC, ) High Battery Voltage Recover 15.5VDC±0.3V for12VDC mode (*2 for 24VDC, ) Idle Consumption-Search Mode <25W when power saver on CHARGER Output Voltage Depends on battery tvpe Charger AC Input Breaker Rrating 30A 40A Overcharge Protection S.D. 15.7VDC for 12VDC mode (*2 for 24VDC mode) Maximum Charge Current 75A 65A 50A BYPASS & PROTECTION Input Voltage Waveform Sine wave (grid or generator) Nominal Input Frequency 50Hz or 60Hz Overload Protection (SMPS Load) Circuit breaker Output Short Circuit Protection Circuit breaker Bypass Breaker Rating 30A 40A Max Bypass Current 30Amp MECHANICAL SPECIFICATIONS Mounting Wall mount Dimensions (W*H*D) 426*206*178 mm 601*206*178 Net Weight (Solar CHG) kg 26 24.5 24.8 38.2 35.8 45.2 45 45.2 45 Shipping Dimensions(W*H*D) 570*335*300mm 750*335*300mm Shipping Weight (Solar CHG) kg 29.1 27.5 27.5 42.3 40 49.5 49.3 49.5 49.3 OTHER Operation Temperature Range 0°C to 40°C Storage Temperature -15°C to 60°C Audible Noise 60dB MAX Display LCD Standard Warranty 1 year SKU: n/a
-
Monocrystalline, SMKSolar, Solar Panel
320W Solar Panel (Monocrystalline)
KEY FEATURES
4 Busbar PV Cells guaranteeing higher efficiency and durability
High PID guaranteed
Improved low light performance
Designed for extreme weather locations: Module is certified to withstand wind loads of 2400 Pa andLinear Performance WARRANTY
● 25-year linear power output warranty no less than 80% power output
● 12-year linear power output warranty no less than 90% power output
● 12 years product warranty
ISO9001:2008 IEC61215 IEC61730SKU: n/a -
Monocrystalline, SMKSolar, Solar Panel
270W Solar Panel (Monocrystalline)
KEY FEATURES
- 4 Busbar PV Cells guaranteeing higher efficiency and durability
- High PID guaranteed
- Improved low light performance
- Designed for extreme weather locations: Module is certified to withstand wind loads of 2400 Pa and
SKU: n/a -
Monocrystalline, SMKSolar, Solar Panel
320W Solar Panel (Monocrystalline)
KEY FEATURES
4 Busbar PV Cells guaranteeing higher efficiency and durability
High PID guaranteed
Improved low light performance
Designed for extreme weather locations: Module is certified to withstand wind loads of 2400 Pa andLinear Performance WARRANTY
● 25-year linear power output warranty no less than 80% power output
● 12-year linear power output warranty no less than 90% power output
● 12 years product warranty
ISO9001:2008 IEC61215 IEC61730SKU: n/a -
Monocrystalline, SMKSolar, Solar Panel
270W Solar Panel (Monocrystalline)
KEY FEATURES
- 4 Busbar PV Cells guaranteeing higher efficiency and durability
- High PID guaranteed
- Improved low light performance
- Designed for extreme weather locations: Module is certified to withstand wind loads of 2400 Pa and
SKU: n/a
Products Grid
Affordable Inverter with Battery Packages
Recently Ordered Products
MERCURY 5 KVA SOHO PURE SINE WAVE INVERTER 48V
Specification
Intelligent long backup model
Fully digitised microprocessor control LED
Wide input range [90V -275V inverter mode 115V -270V UPS mode]
Energy saving function with UPS green mode
Cold start function
Short circuit and overload protection
Compatible with all generators
Selectable charging current 20A and 40A
Weight 35kg
Luminous TUBULAR WET CELL 220aH 12V
Epever MPPT Xtra-4210N Solar Charge Controller 40A, 12/24V
Epever MPPT Xtra-4210N Solar Charge Controller 40A, 12/24V
40A, 12/24V Auto Voltage, High Efficiency, Programmable
This XTRA-4210N with the ability to work with different display units (XDB1/XDS1 /XDS2). It also adopts the water-proof design with more professional protection chip for the communication port to provide reliability and meeting the different requirements.
FLEXmax MPPT 80A Solar Controller
60/80A, 12/24/36/48/60 VDC, Auto Voltage, High Efficiency, Programmable
The innovative FLEXmax Maximum Power Point Tracking (MPPT) software algorithm is both continuous and active, increasing your photo-voltaic array power yield up to 30% compared to non-MPPT controllers.
Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230
Overview of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
1500 VA / 1350 W Line interactive UPS with pure sine wave output in 2U rack/tower design, (8) 5-15R output receptacles, input and output noise and transient filtering, configurable input voltage window, automatic battery self-test, alarms for low battery, site wiring fault and overload, USB and contact closure communications, Intellislot Port for SNMP web card communications, RJ-45 port for data line protection, dark start capability, minimum 5 minutes of battery backup at full load, Emergency Power Off (EPO) capability, Tower Stands and Rackmount handles included, two year warranty, UL / c-UL / FCC Part 15, Class A, PS1500RT3-120.
Features of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230
Overview of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
1500 VA / 1350 W Line interactive UPS with pure sine wave output in 2U rack/tower design, (8) 5-15R output receptacles, input and output noise and transient filtering, configurable input voltage window, automatic battery self-test, alarms for low battery, site wiring fault and overload, USB and contact closure communications, Intellislot Port for SNMP web card communications, RJ-45 port for data line protection, dark start capability, minimum 5 minutes of battery backup at full load, Emergency Power Off (EPO) capability, Tower Stands and Rackmount handles included, two year warranty, UL / c-UL / FCC Part 15, Class A, PS1500RT3-120.
Features of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
APC-Smart-UPS-2700-Watts-Interface-Port-SmartSlot-USB-SMT3000I
APC Smart-UPS 1980 Watts Interface Port SmartSlot SMT2200i
APC Smart-UPS,1980 Watts /2200 VA,Input 230V /Output 230V, Interface Port SmartSlot
Maximizes battery performance, life, and reliability through intelligent, precision charging. Protects connected loads from surges, spikes, lightning, and other power disturbances. Automatically starts up the connected equipment upon the return of utility power.
Specification:
Brand: APC
Product Type: UPS
Model No: SMT2200I
SKU: APSUPSMTK23
Weight (kg): 10
Features:
USB connectivity : Provides management of the UPS via a USB port (not available on all models).
APC Smart-UPS,1980 Watts /2200 VA,Input 230V /Output 230V, Interface Port DB-9 RS-232, SmartSlot
Smart UPS signalling RS-232 cable, USB cable, User Manual
Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230
Overview of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
1500 VA / 1350 W Line interactive UPS with pure sine wave output in 2U rack/tower design, (8) 5-15R output receptacles, input and output noise and transient filtering, configurable input voltage window, automatic battery self-test, alarms for low battery, site wiring fault and overload, USB and contact closure communications, Intellislot Port for SNMP web card communications, RJ-45 port for data line protection, dark start capability, minimum 5 minutes of battery backup at full load, Emergency Power Off (EPO) capability, Tower Stands and Rackmount handles included, two year warranty, UL / c-UL / FCC Part 15, Class A, PS1500RT3-120.
Features of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
20KVA Servo Voltage Stabilizer (130V-260V)
Description
Overview
Low, High, Fluctuating NEPA Voltage?
One Central Stabilizer for your entire Flat, Home, Office, etc.
Input Voltage (130-260V)
Stablize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
TND-20K Servo Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house loads.
Features
Input Voltage (130-260V)
Steady output voltage
Digital Control
Servo Technology + Toroidal Transformer System
Carbinet Design
LED display
Low and Over voltage protection
Applications
Home Appliances
Office Equipment
General Use
3.5Kva 3KW 24V transformerless Hybrid Inverter with inbuilt 80A MPPT solar charger controller
3.5Kva 3KW 24V transformerless Hybrid Inverter with inbuilt 80A MPPT solar charger controller
Feature:
1.Pure sine wave inverter
2.Built-in MPPT solar charge controller
3.Selectable input voltage range for home appliances and personal computers
4.Selectable charging current based on applications
5.Configurable AC/Solar input priority via LCD setting
6.Compatible to mains voltage or generator power
7.Auto restart while AC is recovering
20 watt All in one solar street light with motion Sensor
3.5kVA – 24V Inverter – Studer Xtender XTM 3500
Description
PRAG offers you Studer Xtender XTM 3500 with its seemingly limitless programmable functions, the XTM offers unequaled flexibility compared to other products on the market.
This Studer Xtender XTM 3500 – 3.5KVA – 24V – inverter/charger has a continuous power rating of 3kVA up to an ambient temperature. In addition to this, it has a 30 minute power rating of 3.5kVA, and can deliver 9kVA for up to 5 seconds! Thanks to this very high surge power capacity, it can supply without worries loads with a high start-up current.
The battery charging current can be adjusted between 0 and 90Adc. The factory default settings include a battery charging curve best suited for lead acid batteries with gelled electrolyte (GEL). This battery charging curve can be easily adapted to other types of batteries including OPzS, NiFe, Lithium and Redox Flow, to name but a few.
The transfer system is active when an AC power source (generator, public grid, shore power…) is available at the AC input of the Xtender. The transition between inverter and transfer mode is achieved without any power cut and allows up to 50Aac of current to pass through to the loads. Similarly, the transition between transfer and inverter mode is extremely fast (max 15ms), which makes the Xtender suitable for many UPS (uninterruptable power supply) applications.
The Smart-Boost function allows the Xtender to assist the AC source via the inverter function. This way, the currents from both sources (AC-in and inverter) are combined to deliver the energy required by big loads if the loads are more than the AC source can supply.
The injection function allows the Xtender to send energy to the grid. This function is especially useful in energy storage systems where either the excess energy is injected to the grid, or a specific current is injected at a specific time of the day.
The Xtender has two auxiliary contacts, configured by default for the automatic start of a generator and the alarm function.
Studer Xtender XTM 3500 – 3.5KVA – 24V – Inverter xts-xtm-xth-en_page_09-4
Studer Xtender XTM 3500 – 3.5KVA – 24V – Inverter Design
The RCM-10 accessory offers a remote entry to control the inverter externally.
In addition, the Xtender can be equipped with a remote entry, which can be used to change functions or control the system externally.
Monitoring and control on site or remotely is possible with the RCC-02/03 remote control or with the LAN, GSM or SMS interfaces. Detailed information on all Xtender accessories can be found on the corresponding section of the website.
The Xtender communication bus is shared with the MPPT solar charge controllers of the VarioTrack and VarioString series. Inverters and charge controllers are synchronized to ensure an optimum charge of the battery and use of available energy.
Studer Xtender XTM 3500 – 3.5KVA – 24V – PRAG Inverter Features
True sine wave voltage
Reliable and silent with any kind of load
Outstanding overload capabilities
Smart-Boost function for assistance to the source even with difficult loads
Automatic reduction of peak loads (power shaving)
Multi-stage programmable battery charger with PFC (Power Factor Correction)
Stand-by level adjustable over a large range and from a very low threshold
Ultra-fast transfer relay
Control by digital signal processors (DSP)
High efficiency
Easy to Install, Operate resolve Solve
320W Solar Panel (Monocrystalline)
KEY FEATURES
4 Busbar PV Cells guaranteeing higher efficiency and durability
High PID guaranteed
Improved low light performance
Designed for extreme weather locations: Module is certified to withstand wind loads of 2400 Pa and
Linear Performance WARRANTY
● 25-year linear power output warranty no less than 80% power output
● 12-year linear power output warranty no less than 90% power output
● 12 years product warranty
ISO9001:2008 IEC61215 IEC61730
10KVA Relay Stabilizer
SVR series single phase wall mounted relay control ac voltage regulator
Model: SVR-10KVA
Description: SVR series single phase wall mounted relay control ac voltage regulator adopt new LED display technology, can display the delay time, output voltage and protection state automatically. It has advantages of time-delay protection, over-voltage and under-voltage protection, automatic alarming,etc. It is mainly applied to household appliance like air-conditioner, refrigerator, washing machine, PC, Led tv, electric fan etc.
Features:
1.Relay control, faster response speed against voltage variation.
With intelligent PCB, protect your appliance automatically and intelligently.
Brand-new LED Display, allow monitoring the working status of stabilizer easily.
4.Wide input voltage range, from 80v~270v.
5.High efficiency, more than 95%.
6.With over-voltage, delay time, low-voltage, over-temp protection.
Product specifications:
Model SVR-10000VA
Power 10000VA
Technology Relay Control
LED display Information Output Voltage/ Input Voltage/Delay Time
Light Green Normal Working
Red Delay Time
Yellow Voltage City
Green Output Voltage≥220±4V
Protection Over Voltage 250v±5%
Over Loading More than 120%
Over Temperature 120°C±10°C
Circuit Breaker Regulator/ By Pass
Input Voltage 80V~270VAC
Output Voltage 220V±8% Adjustable
Frequency 50/60HZ
Phase Single Phase
Efficiency ≥95%
Ambient Temperature `-15°C~45°C
Relative Humidty <95%
Waveform Distortion No Additional Wave Form Distortion
Insulating Resistance Normally More Than 2Ω
Packing 1 PCS
MERCURY 1.2KVA INVERTER MODIFIED SINE WAVE
Specification
Model 1.2k
Voltage 230VAC
Capacity 1200VA/720W
Voltage Range 170-280VAC (UPS Mode)
90-280 VAC (INV Mode)
Voltage Regulation(Battery Mode) 230VAC +/-10%
Transfer Time 20 ms Typical
Waveform Modified Sine Wave
Battery Voltage 12VDC
Floating Charge Voltage 13.75VDC +-0.25
Charge Current 10/20A
Dimention 330 x 227.8 x 92.5
Net Weight (Kgs) 2.6
Gross Weight (Kgs) 3.1
10KVA Relay Stabilizer
SVR series single phase wall mounted relay control ac voltage regulator
Model: SVR-10KVA
Description: SVR series single phase wall mounted relay control ac voltage regulator adopt new LED display technology, can display the delay time, output voltage and protection state automatically. It has advantages of time-delay protection, over-voltage and under-voltage protection, automatic alarming,etc. It is mainly applied to household appliance like air-conditioner, refrigerator, washing machine, PC, Led tv, electric fan etc.
Features:
1.Relay control, faster response speed against voltage variation.
With intelligent PCB, protect your appliance automatically and intelligently.
Brand-new LED Display, allow monitoring the working status of stabilizer easily.
4.Wide input voltage range, from 80v~270v.
5.High efficiency, more than 95%.
6.With over-voltage, delay time, low-voltage, over-temp protection.
Product specifications:
Model SVR-10000VA
Power 10000VA
Technology Relay Control
LED display Information Output Voltage/ Input Voltage/Delay Time
Light Green Normal Working
Red Delay Time
Yellow Voltage City
Green Output Voltage≥220±4V
Protection Over Voltage 250v±5%
Over Loading More than 120%
Over Temperature 120°C±10°C
Circuit Breaker Regulator/ By Pass
Input Voltage 80V~270VAC
Output Voltage 220V±8% Adjustable
Frequency 50/60HZ
Phase Single Phase
Efficiency ≥95%
Ambient Temperature `-15°C~45°C
Relative Humidty <95%
Waveform Distortion No Additional Wave Form Distortion
Insulating Resistance Normally More Than 2Ω
Packing 1 PCS
MERCURY 3KVA SPIRIT PLUS SOLAR HYBRID INVERTER CHARGE CONTROLLER
Description
Mercury 3kva Spirit Plus Solar Hybrid Inverter Charge Controller
Pure Sine Wave stand alone hybrid inverter system combining the functions of inverter, solar and AC charger, provides a long run time un-uninterruptible power supply.
3KVA/3KW PF 1.0 24VDC with Solar Charge Controller, solar power capacity 1KW
A&E 10KVA HYBRID INVERTER
Features:
Smart LCD setting(Working modes, Charge Current, Charge voltage, etc.
Built-in MPPT solar charge controller 80A/100A/200A
MPPT efficiency max 98%
Powerful charge rate up to 140Amp
DC start &Automatic Self-Diagnostic Function
WIFI / USB monitoring function with free CD (wi-fi optional)
Supporting AGS, BTS port
Compatible to generator
30KVA Servo Voltage-Stabilizer (130-260V)
Description
Overview
Low, High, Fluctuating NEPA Voltage? Therefore get One Central 30kva Servo Voltage-Stabilizer (130-260)v for your entire Home or Office. To begin with, it comes with an Input Voltage of 130-260V, thus Stablize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
The 30kva Servo Central Voltage-Stabilizer (130-260)v for your entire Home or Office is a TND-130K Servo Automatic Voltage Stabilizer Series that is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house loads.
Features
Input Voltage Range (130-260V)
Steady output voltage
Digital Control
Servo Technology + Toroidal Transformer System
LED display
Low and Over voltage protection
Applications
Home Appliances
Office Equipment and
General Use
120V 60A-2 INPUTS SOLAR CHARGE CONTROLLER
120V 60A-2 INPUTS SOLAR CHARGE CONTROLLER
Product Features
Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230
Overview of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
1500 VA / 1350 W Line interactive UPS with pure sine wave output in 2U rack/tower design, (8) 5-15R output receptacles, input and output noise and transient filtering, configurable input voltage window, automatic battery self-test, alarms for low battery, site wiring fault and overload, USB and contact closure communications, Intellislot Port for SNMP web card communications, RJ-45 port for data line protection, dark start capability, minimum 5 minutes of battery backup at full load, Emergency Power Off (EPO) capability, Tower Stands and Rackmount handles included, two year warranty, UL / c-UL / FCC Part 15, Class A, PS1500RT3-120.
Features of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
A&E 30KVA Central Relay Stabilizer Single Phase
SVR series single phase wall mounted relay control ac voltage regulator Model: SVR-12KVA Description: SVR series single phase wall mounted relay control ac voltage regulator adopt new LED display technology, can display the delay time, output voltage and protection state automatically. It has advantages of time-delay protection, over-voltage and under-voltage protection, automatic alarming,etc
15KVA Wall-mount Servo Stabilizer
TSD(AVS)series wall mounted high precision servo motor control ac voltage regulator Model: TSD(AVS)15KVA Description: TSD(AVS)series single phase wall mounted servo motor control ac voltage regulator is specially designed for the usage of air-conditioner and refrigerator, it has the function of Automatic voltage stabilization, with nice appearance and obvious features of high efficiency
Luminous 5500VA/96V inverter
Runs Heavy Loads
These powerful UPS can, depending on capacity, run heavy loads like AC, Water Heater, Petrol Pumps, Photocopiers, Dental Chairs etc.
Intuitive Display
The UPS supports all types of batteries like the flat plate, tubular, VRLA, SMF – giving you the flexibility to choose from a wide range of batteries.
ABCC Technology
Adaptive Battery charging control system technology (ABCC) ensures faster battery charging and enhances battery life usage.
Safety for your home & Office
The Cruze range is armed with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge.
Easy UPS Bypass
In case of any fault in UPS, the bypass switch can be used to bypass the UPS and allow mains to be available without any wiring changes.
KEY FEATURES
150W Solar Panel (Monocrystalline)
Solar Cynergy solar modules are designed specifically for use in OFF GRID applications. Manufactured in accordance to ISO9001 standards and certified by IEC and CSA/US to assure electrical safety compliance.
APPLICATIONS:
Off-grid power for cabins, vacation homes, RVs, campers, remote monitoring systems, and remote villages
Solar water pumping and solar-powered refrigerators
Remote WiFi and wireless repeaters
Solar Cynergy modules offer 5 year workmanship/25 year performance warranty
MERCURY 2.4 KVA MODIFIED SINE WAVE INVERTER
Specification
Model 2.4KVA
Voltage 230VAC
Capacity 2400VA/1440W
Voltage Range 170-280VAC (UPS Mode) 90-280 VAC (INV Mode)
Voltage Regulation(Battery Mode) 230VAC +/-10%
Transfer Time 20 ms Typical
Waveform Modified Sine Wave
Battery Voltage 24V
Floating Charge Voltage 27.00VDC +-0.5
Charge Current 10/20A
Dimensions 330 x 227.8 x 92.5
Net Weight (Kgs) 2.8
Gross Weight (Kgs) 3.3
20 watt All in one solar street light with motion Sensor
120V 60A-2 INPUTS SOLAR CHARGE CONTROLLER
120V 60A-2 INPUTS SOLAR CHARGE CONTROLLER
Product Features
30KVA (225-456) 3-PHASE VOLTAGE REGULATOR
Description
Overview
This 30KVA (225-456) 3-PHASE VOLTAGE REGULATOR model is a three-phase compensation with high-precision regulator, cabinet type with LED digital display design, compensated structure voltage regulation. Also, It is mainly composed of voltage regulation transformer and compensation transformer. Besides, it is also characterized by enough power that can achieve relatively large power and maintain high precision output.
In addition to what has been mentioned above, the input voltage range (especially the minimum voltage) is very wide. For example, the low input voltage can be 88V (the rated line to neutral voltage is 220V) this results in the electrical equipment cannot start and operate. The common voltage stabilizer cannot handle extreme low and unbalance voltage. Even if those can reluctantly work, the output is de-rated a lot due to low voltage and high current situation. A special voltage stabilizer with a step-up transformer can somehow solve the problem, but it has the disadvantages of high cost, low efficiency and more space occupation.
Our specially designed PRAG series extreme wide voltage stabilizer adopts patent regulator that copes with low input voltage, and output voltage regulated to rated 220V without de-rated input power. Its high cost effective, reliability, high performance and long lifetime are all backed by a world class manufacturer with decades of mains power experience. It is applied for any load like telecom, medical, industrial and household applications.
30KVA 3 Phase Stabilizer Applications
The Prag 30KVA (225-456) 3-PHASE VOLTAGE REGULATOR is widely used in lots of places and not limited to industries and mining enterprises, printing companies, machine tools, post and telecommunications business, railways, construction sites, schools, hospitals, hotels, defence ministries, scientific research centres and other departments of electronic computers, precision machine tools, precision instruments, experimental devices, elevators and production lines.
Features
Extremely wide voltage regulation range
Maintenance free roller type carbon brush
Inividual regulation with unique small dimension
High Mean time Between Failure (MTBF)
Reliable and quiet servo motors
Wheels mounted for easy installation
Start up delay to prevent over current in rush
Isolation transformer on request
Indoor or outdoor version on request
Applications of the 30KVA 3 Phase Stabilizer
BROADCAST: Regulation for broadcast transmitter sites and studios
COMMERCIAL: High-rise building, elevator control, large A/C chillers, lighting, other sensitive critical systems.
INDUSTRIAL: Industrial automation, process control, CNC, factory robotics, heavy load machinery.
MEDICAL: X-ray, CT scanner, MRI system, Radiation therapy, machine, other medical imaging equipments.
TELECOM: Mobile base stations, exchanges stations, control centers and transmission relay stations.
HOUSEHOLD: Flats, Houses, etc
A&E 15KVA HYBRID INVERTER
Features:
Smart LCD setting(Working modes, Charge Current, Charge voltage, etc.
Built-in MPPT solar charge controller 80A/100A/200A
MPPT efficiency max 98%
Powerful charge rate up to 140Amp
DC start &Automatic Self-Diagnostic Function
WIFI / USB monitoring function with free CD (wi-fi optional)
Supporting AGS, BTS port
Compatible to generator
FLEXmax MPPT 80A Solar Controller
60/80A, 12/24/36/48/60 VDC, Auto Voltage, High Efficiency, Programmable
The innovative FLEXmax Maximum Power Point Tracking (MPPT) software algorithm is both continuous and active, increasing your photo-voltaic array power yield up to 30% compared to non-MPPT controllers.
5KVA – 48V Smart Hybrid Inverter
PRAG 5KVA – 48V Smart (Pure Sine Wave) Hybrid Inverter/Charger is a combination of an inverter, battery charger and AC auto transfer switch into one complete system with high conversion efficiency.
So, it is packed with unique features and it is one of the most advanced inverter and chargers in the market today.
Furthermore, the PRAG Inverter features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.
Subsequently, the (Pure Sine Wave) Inverter and Charger is equipped with a powerful charger of up to 110Amps (depending on model). However, the overload capacity is super to the best of the continuous output for limited period of seconds to reliably support tools and equipment longer.
Trust the product will deliver the best result for you.
PRAG 5KVA – 48V Smart Hybrid Inverter Features
Pure Sine Wave Output
Narrow/Wide Input Range Selection
Charging Current Selectable
Built-In AC Charger
Generator Compatible
Cold Start Function
RS232 Multiple Communications and
Optional USB Port
2.5kVA – 24V Cyber Power Inverter
Description
2.5kVA – 24V Cyber Power Inverter:- Non-stop power backup with guaranteed quality power output to support a wide range of applications
Ideal for security/emergency system, the Emergency Power Systems Series with Automatic Voltage Regulation (AVR) provides AC power output to guarantee stable power supply. When connected to additional external batteries and generators, the products provide backup power output during power failures by automatically switching from utility to external batteries, ensuring seamless operation of devices.
The systems also feature multifunction LCD readout to display precise information of power and battery conditions for convenient management.
Pure Sine Wave Output
The product provides pure sine wave output, which is suitable for equipment requiring active PFC power supply, motor-based devices and sensitive electronics. It guarantees electronic equipment to run more efficiently.
APC Smart-UPS On-Line 4500 Watts Interface Port Contact SRT5KXLI
APC Smart-UPS On-Line 4500 Watts Interface Port Contact SRT5KXLI
10/100 Base
T Connection
Connect the device to a network using a 10 or 100 Base
T connection
Battery failure notification.
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms
SMKSOLAR 60A SMK MPPT Solar Charge Controller SCH 60A
SMKSOLAR 60A SMK MPPT Solar Charge Controller SCH 60A
| Model | SMK-SCH-50A | SMK-SCH-60A | SMK-SCH-70A | SMK-SCH-80A | ||
| Solar System Voltage | 12V/24V/36V/48V Auto work | |||||
| Electrical | ||||||
| PV Operating Voltage | 18～150Vdc@12V 35～150Vdc@24V ?50～150Vdc@36V ?60～150Vdc@48V | |||||
| Max. PV input power | 12V 700W | 12V ?900W | 12V 1000W | 12V 1200W | ||
| 24V 1400W | 24V 1800W | 24V 2000W | 24V 2300W | |||
| 36V 2100W | 36V 2600W | 36V 3000W | 36V 3300W | |||
| 48V 2900W | 48V 3400W | 48V 4000W | 48V 4600W | |||
| Rated Output Current | 50A Adjustable(0A～50A) | 60A Adjustable(0A～60A) | 70A Adjustable(0A～70A) | 80A Adjustable(0A～80A) | ||
| Rated DC load Current | 60A | |||||
| Self consumption | 2W | |||||
| Max.Conversion Efficiency | 0.98 | |||||
| Protection | PV array short circuit, over charging,battery reverse polarity,output short circuit | |||||
| Battery charging | ||||||
| Battery Type | Sealed ?Gel AGM ?Flooded ?Lithium | |||||
| Charge algorithm | 4 stage: Bulk, Absorption, Float, Equalize charging | |||||
| Bulk charge voltage | Sealed: 14.4V AGM 14.2V ?Gel:14.2V Flooded:14.6V User defined:10-15V | |||||
| Float charge voltage | Sealed/Gel/AGM:13.8V ?Flooded:13.7V User defined:10-15V | |||||
| Equalize charge voltage | Sealed 14.6V ?AGM:14.8V Flooded:14.9V | |||||
| Load disconnect voltage | 10.5V～12V adjustable | |||||
| Low voltage reconnect voltage | 12.5V | |||||
| Temperature compensation | 5mV/℃/2V with BTS | |||||
Feature：
12V/24V/36/48V Auto work,parallel design
Multi-stage charging optimizes battery performance
MPPT eficiency >99.5%, Peak conversion efficiency 98%
Compatible with Gel. AGM.Flooded. Sealed lead acid and Lithium battery
Comprehensive protection
Heatsink cooling, quiet operation
Comfortable installation and commissioning
Monitoring your solar harvest on line via RS485 communition, Ethernet/RS232 communition Optional
| Ambient operating temperature | -25℃～60℃ | |||||
| Storage Temperature | -40℃～80℃ | |||||
| Humidity | 100% non-condensing | |||||
| Cooling | Heatsink Cooling | |||||
120V 60A-2 INPUTS SOLAR CHARGE CONTROLLER
120V 60A-2 INPUTS SOLAR CHARGE CONTROLLER
Product Features
APC Smart-UPS On-Line 2700 Watts Interface Port Contact SRT3000XL
APC Smart-UPS On-Line 2700 Watts Interface Port Contact SRT3000XLI
Battery failure notification provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that bypasses unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.
Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.
150W Solar Panel (Monocrystalline)
Solar Cynergy solar modules are designed specifically for use in OFF GRID applications. Manufactured in accordance to ISO9001 standards and certified by IEC and CSA/US to assure electrical safety compliance.
APPLICATIONS:
Off-grid power for cabins, vacation homes, RVs, campers, remote monitoring systems, and remote villages
Solar water pumping and solar-powered refrigerators
Remote WiFi and wireless repeaters
Solar Cynergy modules offer 5 year workmanship/25 year performance warranty
Victron Energy VICTRON ENERGY EASYSOLAR 48/5000 INVERTER
AC distribution
The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A and two 16A circuit breakers.
An additional 16A output is controlled by the AC input: it will switch on only when AC is available.
PowerAssist
Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.
Unique solar application software
COSMOS DEEP CYCLE GEL BATTERY 200AH 12V
Description
COSMOS GEL DEEP CYCLE BATTERY 200ah 12V
18 Months Warranty
Maintenance-free, Fast Recharge, Pollution-free
Sealed and Maintenance Free Operation – RecombinationTechnology maintenance-free
Leak-proof Construction – non-spillable
ABS material that increases the strength of battery container
Superior Quality and Reliability
High-quality AGM Separator – Extends Battery Cycle Life and Prevents Micro Short-circuit
Exceptional Deep Discharge Recovery
Low self-discharge
MC4 Connectors for Panels Connection, 30 Amps, 2 Male, Female Pair
MC4 Connectors for Panels Connection, 30 Amps, 2 Male, Female Pair
Loom Solar Introduces MC4 connectors for connecting panels in simple ways
Technical details
FLEXmax MPPT 80A Solar Controller
60/80A, 12/24/36/48/60 VDC, Auto Voltage, High Efficiency, Programmable
The innovative FLEXmax Maximum Power Point Tracking (MPPT) software algorithm is both continuous and active, increasing your photo-voltaic array power yield up to 30% compared to non-MPPT controllers.
SMKSOLAR 2-1 YMC4 SOLAR CONNECTOR
SMKSOLAR 2-1 YMC4 SOLAR CONNECTOR
| Subject | Product Detailed Information |
| Type of appliance | PV Component Connector |
| Model No. | PV-SN02/SY |
| Rated Voltage (VDC) | 1000 |
| Rated Impulse Voltage (V) | 8000 |
| Rated Current (A) | 30A |
| Pollution Degree (1/2/3/4) | 3 |
| Overvoltage Category | III |
| Low Ambient Temperature (°c) | -40°c |
| Upper Ambient Temperature ( °c ) | +90 °c |
| Enclosure Rating ( RTI and Flammability Class) | UL94-V0 |
| Value Range of Cable Clamp | 5.5-6.3mm diameter for cable |
| Rated Cross Section of Conductor | 2.5mm2 or 4mm2 |
| Degree of Protection (IP Code) | IP67 |
| Plug Power | 30N-80N |
| Contact Material | Copper |
| Insulation Material | PPO |
| Authentication | TUV |
| Wire length | 85mm or Arbitrary length |
*Flexible leads make this type of branch connector more versatile than the none flexible type.
*Acc.to DIN V VDE V 0126-3/12.06,UL1703 standard.
Epever MPPT Xtra-4210N Solar Charge Controller 40A, 12/24V
Epever MPPT Xtra-4210N Solar Charge Controller 40A, 12/24V
40A, 12/24V Auto Voltage, High Efficiency, Programmable
This XTRA-4210N with the ability to work with different display units (XDB1/XDS1 /XDS2). It also adopts the water-proof design with more professional protection chip for the communication port to provide reliability and meeting the different requirements.
SMKSOLAR 60A SMK MPPT Solar Charge Controller SCH 60A
SMKSOLAR 60A SMK MPPT Solar Charge Controller SCH 60A
| Model | SMK-SCH-50A | SMK-SCH-60A | SMK-SCH-70A | SMK-SCH-80A | ||
| Solar System Voltage | 12V/24V/36V/48V Auto work | |||||
| Electrical | ||||||
| PV Operating Voltage | 18～150Vdc@12V 35～150Vdc@24V ?50～150Vdc@36V ?60～150Vdc@48V | |||||
| Max. PV input power | 12V 700W | 12V ?900W | 12V 1000W | 12V 1200W | ||
| 24V 1400W | 24V 1800W | 24V 2000W | 24V 2300W | |||
| 36V 2100W | 36V 2600W | 36V 3000W | 36V 3300W | |||
| 48V 2900W | 48V 3400W | 48V 4000W | 48V 4600W | |||
| Rated Output Current | 50A Adjustable(0A～50A) | 60A Adjustable(0A～60A) | 70A Adjustable(0A～70A) | 80A Adjustable(0A～80A) | ||
| Rated DC load Current | 60A | |||||
| Self consumption | 2W | |||||
| Max.Conversion Efficiency | 0.98 | |||||
| Protection | PV array short circuit, over charging,battery reverse polarity,output short circuit | |||||
| Battery charging | ||||||
| Battery Type | Sealed ?Gel AGM ?Flooded ?Lithium | |||||
| Charge algorithm | 4 stage: Bulk, Absorption, Float, Equalize charging | |||||
| Bulk charge voltage | Sealed: 14.4V AGM 14.2V ?Gel:14.2V Flooded:14.6V User defined:10-15V | |||||
| Float charge voltage | Sealed/Gel/AGM:13.8V ?Flooded:13.7V User defined:10-15V | |||||
| Equalize charge voltage | Sealed 14.6V ?AGM:14.8V Flooded:14.9V | |||||
| Load disconnect voltage | 10.5V～12V adjustable | |||||
| Low voltage reconnect voltage | 12.5V | |||||
| Temperature compensation | 5mV/℃/2V with BTS | |||||
Feature：
12V/24V/36/48V Auto work,parallel design
Multi-stage charging optimizes battery performance
MPPT eficiency >99.5%, Peak conversion efficiency 98%
Compatible with Gel. AGM.Flooded. Sealed lead acid and Lithium battery
Comprehensive protection
Heatsink cooling, quiet operation
Comfortable installation and commissioning
Monitoring your solar harvest on line via RS485 communition, Ethernet/RS232 communition Optional
| Ambient operating temperature | -25℃～60℃ | |||||
| Storage Temperature | -40℃～80℃ | |||||
| Humidity | 100% non-condensing | |||||
| Cooling | Heatsink Cooling | |||||
Ritar battery 200AH 12V
Ritar power, the safe and intelligent power. The VRLA Deep Cycle (DC) battery series is specially designed for frequent cyclic discharge. By using strong grids and specially designed active material, the DC series battery offers 30% more cyclic life than the standby series. It is suitable for UPS, solar and wind energy, telecom system, electric power system, electric vehicles, golf cars and many more.
Genus Tubular Battery 220ah 12V
Genus supplies high performance, zero maintenance batteries ideal for use with UPS and Inverters. These batteries are reliable and economical for all types of inverters that are used for a variety of domestic and office applications. They are especially designed to support long and frequent power cuts
200 watt mono-crystalline solar panel
1. ISO 9001:2008 & ISO 14001 management systems
2. IEC 61215 & IEC 61730 standard quality
3. 0-5W positive power tolerance
4. Stable performance under weak light conditions
5. Wind load up to 3800Pa / Snow load up to 5400Pa
6. Salt mist and ammonia corrosion tests passed
7. 30-year linear power warranty / 10-year product warranty
Epever MPPT Xtra-4210N Solar Charge Controller 40A, 12/24V
Epever MPPT Xtra-4210N Solar Charge Controller 40A, 12/24V
40A, 12/24V Auto Voltage, High Efficiency, Programmable
This XTRA-4210N with the ability to work with different display units (XDB1/XDS1 /XDS2). It also adopts the water-proof design with more professional protection chip for the communication port to provide reliability and meeting the different requirements.
APC Smart-UPS VT 30kVA 400V
APC Smart-UPS VT 30kVA 400V w/4 Batt Mod Start-Up 5X8 Int Maint Bypass Parallel Capable SUVTP30KH4B4S
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Input power factor correction minimizes installation costs by enabling the use of smaller generators and cabling.Intelligent battery management maximizes battery performance, life, and reliability through intelligent, precision charging.Manual maintenance bypass reduces installation costs by eliminating the need for an external mechanical bypass.
3.5Kva 3KW 24V transformerless Hybrid Inverter with inbuilt 80A MPPT solar charger controller
3.5Kva 3KW 24V transformerless Hybrid Inverter with inbuilt 80A MPPT solar charger controller
Feature:
1.Pure sine wave inverter
2.Built-in MPPT solar charge controller
3.Selectable input voltage range for home appliances and personal computers
4.Selectable charging current based on applications
5.Configurable AC/Solar input priority via LCD setting
6.Compatible to mains voltage or generator power
7.Auto restart while AC is recovering
15KVA Servo Voltage Stabilizer (80-260V)
Description
Overview
Low, High, Fluctuating NEPA Voltage?
One Central Stabilizer for your entire Flat, Home, Office, etc.
Input Voltage (80-260V)
Prag 15KVA Servo Voltage Stabilizer (80-260V) Stablize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
TND-15K Servo Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house loads.
Features
Input Voltage (80-260V)
Steady output voltage
Digital Control
Servo Technology
LED display
Low and Over voltage protection
Applications
Home Appliances
Office Equipment
General Use
SMKSOLAR 2-1 YMC4 SOLAR CONNECTOR
SMKSOLAR 2-1 YMC4 SOLAR CONNECTOR
| Subject | Product Detailed Information |
| Type of appliance | PV Component Connector |
| Model No. | PV-SN02/SY |
| Rated Voltage (VDC) | 1000 |
| Rated Impulse Voltage (V) | 8000 |
| Rated Current (A) | 30A |
| Pollution Degree (1/2/3/4) | 3 |
| Overvoltage Category | III |
| Low Ambient Temperature (°c) | -40°c |
| Upper Ambient Temperature ( °c ) | +90 °c |
| Enclosure Rating ( RTI and Flammability Class) | UL94-V0 |
| Value Range of Cable Clamp | 5.5-6.3mm diameter for cable |
| Rated Cross Section of Conductor | 2.5mm2 or 4mm2 |
| Degree of Protection (IP Code) | IP67 |
| Plug Power | 30N-80N |
| Contact Material | Copper |
| Insulation Material | PPO |
| Authentication | TUV |
| Wire length | 85mm or Arbitrary length |
*Flexible leads make this type of branch connector more versatile than the none flexible type.
*Acc.to DIN V VDE V 0126-3/12.06,UL1703 standard.
Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230
Overview of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
1500 VA / 1350 W Line interactive UPS with pure sine wave output in 2U rack/tower design, (8) 5-15R output receptacles, input and output noise and transient filtering, configurable input voltage window, automatic battery self-test, alarms for low battery, site wiring fault and overload, USB and contact closure communications, Intellislot Port for SNMP web card communications, RJ-45 port for data line protection, dark start capability, minimum 5 minutes of battery backup at full load, Emergency Power Off (EPO) capability, Tower Stands and Rackmount handles included, two year warranty, UL / c-UL / FCC Part 15, Class A, PS1500RT3-120.
Features of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230
Overview of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
1500 VA / 1350 W Line interactive UPS with pure sine wave output in 2U rack/tower design, (8) 5-15R output receptacles, input and output noise and transient filtering, configurable input voltage window, automatic battery self-test, alarms for low battery, site wiring fault and overload, USB and contact closure communications, Intellislot Port for SNMP web card communications, RJ-45 port for data line protection, dark start capability, minimum 5 minutes of battery backup at full load, Emergency Power Off (EPO) capability, Tower Stands and Rackmount handles included, two year warranty, UL / c-UL / FCC Part 15, Class A, PS1500RT3-120.
Features of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230
Overview of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
1500 VA / 1350 W Line interactive UPS with pure sine wave output in 2U rack/tower design, (8) 5-15R output receptacles, input and output noise and transient filtering, configurable input voltage window, automatic battery self-test, alarms for low battery, site wiring fault and overload, USB and contact closure communications, Intellislot Port for SNMP web card communications, RJ-45 port for data line protection, dark start capability, minimum 5 minutes of battery backup at full load, Emergency Power Off (EPO) capability, Tower Stands and Rackmount handles included, two year warranty, UL / c-UL / FCC Part 15, Class A, PS1500RT3-120.
Features of Liebert PSI UPS 1500VA (1350W) Rack/Tower -PS1500RT3-230:
Luminous SMF BLUE 200AH 12V
APPLICATION
MC4 Connectors for Panels Connection, 30 Amps, 2 Male, Female Pair
MC4 Connectors for Panels Connection, 30 Amps, 2 Male, Female Pair
Loom Solar Introduces MC4 connectors for connecting panels in simple ways
Technical details
3.5KVA/48V Solar Inverter
Description
Featured:
DSP based pure sine wave inverter system
Auto Sense Intelligent Control Smart Charger
Mains Mode Short Circuit Protection
Fast Changeover ensuring Compatibility with Computers
TDR (Time Delay Relay), especially for AC compressor based applications
Compatible with Generator Sets
Application:
Home Appliances
Reliable power Back-up Source for Emergency / Critical Electrical Loads in sudden power outages.
Computers & Peripherals Office Equipment
Petrol / Diesel Dispensing Machines, Air Conditioner
Many More application which require reliable back-up power
Major Users:
Residential Apartments, Shopping Malls, Banks, Corporate Offices, Hospitals, Petrol Pumps, Academic Institutes, Clinical Laboratories, Hotels, etc
270W Solar Panel (Monocrystalline)
KEY FEATURES
1.5KVA 24V Solar Inverter
Overview
High reliable system
Advanced digital automatic control technology to ensure the power durable and reliable
Strong Environment Adaptability
Wide input voltage and frequency range to avoid frequent switching.
Intelligent charging mode.
Shutdown charging function.
Three steps charging mode
Full Display Information
LCD Display: Input voltage, Input frequency, Output voltage, Output frequency, Battery voltage, PV input voltage, Solar charger, Full load, Temperature, Failure.
LCD Display Mode
Full Display Function
Inverter short circuit and overload protection function.
Battery over discharge protection.
Solar cell module polarity reverse connection protection.
Solar charge controller, inverter and other internal short circuit protection.
Features:
Wide input voltage range
Fully digitized microprocessor control
UPS mode and inverter mode suit for different application
LCD displays comprehensive parameters (Optional)
Cold start
Short circuit and overload protection
Intelligent battery management
Changing current is optional
Compatible with generator
